800-3-HINGES
Hinge Guru Image
Custom hinge wisdom at your fingertips!
Guru Academy About Hinge Guru Guden.Com

WELCOME TO HINGE GURU

If you need a custom hinge... you have arrived at the perfect place. The Guru knows all...

Hinge Guru Image

Hundreds of man-years of custom hinge knowledge are compiled and condensed here, with a fast and simple interface. Learning about custom hinge options is a cinch, and getting a price quote is easy as pie.

Also, be sure to check out the Glossary, for definitions of words and concepts.

So take a deep breath, relax, and dive in. The Guden Hinge Guru is working for you.

Oops! It looks like your browser has JavaScript turned off!

The Hinge Guru Site requires JavasScript to work properly

Please enable JavaScript in your browser and refresh this page

SITE INSTRUCTIONS
  1. Select the type of hinge you are looking for.
  2. Select a common customization applied to that type of hinge. A window appears chock full of information about your options.
  3. Select the option you want and it appears in the box on the right entitled Options.
Your Custom Hinge
Your Name *
Company Name
Phone *
Email *
Quantity of interest
Upload Your Drawing
Make From Guden Standard Part
Your Notes
Customization Options
Human test
5 + 7 =
Customizations By Hinge Type
Common Customization Options for Continuous Hinges

Click text to see detailed information and select customization. Click eye to preview customization

More Operations : Pin Cutting Operations Select Customization Option
Normally cut pin
We can supply most pins cut to lengths down to 1.00" and for some sizes, even shorter. The saw cutting operation cuts pins neatly and cleanly but most applications call for a chamfer on one or both of the pin ends.

Pin cut and chamfered
This chamferring process entails grinding down a little of the pin end around the entire pin edge so it is smoother and has a smaller diameter for ease in inserting into a hinge. The typical angle for the chamfer is 45° but that can also be specified.

All of our Mil Spec pins will automatically be cut and chamfered, but for commercial needs, please specify if you require a chamfer.
© 2016 H. A. Guden Co., Inc. 99 Raynor Ave, Ronkonkoma, NY 11779-6634